Medical Sensors Improve With Holey Gold Nanostructures
Sep. 26, 2013 — A new method
that fabricates gold nanostructures quickly and efficiently could lead
to highly sensitive, portable medical sensorsRecent advances in
nanotechnology are providing new possibilities for medical imaging and
sensing. Gold nanostructures, for example, can enhance the fluorescence
of marker dyes that are commonly used to detect biomolecules and
diagnose specific diseases.
Localized
surface plasmon resonance (bright areas) around a gold nanohole enhances
the fluorescence of a biomarker dye (Y-shaped molecule) when a specific
molecule of interest (purple circle) is present. (Credit: A*STAR
Institute of High Performance Computing)
Now, Ping Bai at the A*STAR Institute of High Performance Computing,
Singapore, and co-workers have developed a fast and inexpensive way to
fabricate arrays of gold nanoholes. The researchers have shown that
sensor chips built using these nanostructures can accurately detect
cancer-related molecules in blood and are small enough to be used in
portable medical devices.
Nanohole arrays are designed so that incident light of certain wavelengths will induce large-scale oscillations of the gold electrons, known as localized surface plasmon resonance (SPR). The localized SPR focuses the absorbed light energy to enhance fluorescence (see image).
"Commercial SPR systems are already used in hospital laboratories, but they are bulky and expensive," says Bai. "We would like to develop small, handheld devices for on-the-spot clinical use. This requires localized SPR, for which we need nanohole arrays."
Previously, nanohole arrays have been created using electron-beam lithography (EBL), which is expensive and time consuming. Bai and co-workers used EBL to create a nickel mold and then used the mold to print nanohole patterns onto a photoresist material. The researchers made the nanostructures by evaporating gold onto the patterned structure before peeling off the photoresist material. Because the nickel mold can be reused many times, this method -- called nano-imprinting -- can produce large numbers of gold nanohole arrays.
"We fabricated arrays of 140 nanometer-square nanoholes with very few defects," says Bai. As a first demonstration, the researchers showed that a sensor chip made with their nanohole arrays could detect prostate cancer antigens in blood, and was ten times more sensitive than an identical device that used a gold film without nanoholes. Optimizing the chip design would further improve the sensitivity, Bai notes.
The team believes that these chips could be incorporated into cheap and portable point-of-care devices for rapid diagnosis of diseases such as dengue fever. "The microfluidic cartridge built using our nanohole arrays is about the size of a credit card," says Bai. "In the future, we hope to build detectors that use very simple light sources, such as LEDs, and simple detectors similar to smartphone cameras. These devices will have widespread applications across medical science and could even be used to detect contaminants in food, water or the air."
Nanohole arrays are designed so that incident light of certain wavelengths will induce large-scale oscillations of the gold electrons, known as localized surface plasmon resonance (SPR). The localized SPR focuses the absorbed light energy to enhance fluorescence (see image).
"Commercial SPR systems are already used in hospital laboratories, but they are bulky and expensive," says Bai. "We would like to develop small, handheld devices for on-the-spot clinical use. This requires localized SPR, for which we need nanohole arrays."
Previously, nanohole arrays have been created using electron-beam lithography (EBL), which is expensive and time consuming. Bai and co-workers used EBL to create a nickel mold and then used the mold to print nanohole patterns onto a photoresist material. The researchers made the nanostructures by evaporating gold onto the patterned structure before peeling off the photoresist material. Because the nickel mold can be reused many times, this method -- called nano-imprinting -- can produce large numbers of gold nanohole arrays.
"We fabricated arrays of 140 nanometer-square nanoholes with very few defects," says Bai. As a first demonstration, the researchers showed that a sensor chip made with their nanohole arrays could detect prostate cancer antigens in blood, and was ten times more sensitive than an identical device that used a gold film without nanoholes. Optimizing the chip design would further improve the sensitivity, Bai notes.
The team believes that these chips could be incorporated into cheap and portable point-of-care devices for rapid diagnosis of diseases such as dengue fever. "The microfluidic cartridge built using our nanohole arrays is about the size of a credit card," says Bai. "In the future, we hope to build detectors that use very simple light sources, such as LEDs, and simple detectors similar to smartphone cameras. These devices will have widespread applications across medical science and could even be used to detect contaminants in food, water or the air."
No comments:
Post a Comment